ต คอนโทรลใหม ระบบ Microprocessor AC-VVVF Control ช วยประหย ดไฟฟ ากว าระบบเด ม 40-50%

Size: px

Start display at page:

Download "ต คอนโทรลใหม ระบบ Microprocessor AC-VVVF Control ช วยประหย ดไฟฟ ากว าระบบเด ม 40-50%"

Sylvia Pope
5 years ago
Views:

1 TRACTION MACHINE / เคร องล ฟต SPEED GOVERNOR เคร องควบค มความเร ว ป องก นม ให ล ฟต ว งลงเร วเก นความเร วท ก าหนด CONTROLLER : PLC / Microprocessor Control AC ต คอนโทรลใหม ระบบ Microprocessor AC-VVVF Control ช วยประหย ดไฟฟ ากว าระบบเด ม 40-50%

2 ประต ชานพ ก, แผงป มกด

3 ต วอย างการตกแต งภายในต วล ฟต

4 FLOORING PHOTOCELL ป องก นประต ป ดหน บผ โดยสาร

Liightt Curttaiin FOR DOOR PROTECTION Model 917(B) Number of beams 128 Number of sensors 32 Sensor spacing 53mm Scan Mode 4 ways cross scanning Response time <40ms Range of

tolerance +/-10mm (Door closed, unit touching) Horizontal mounting tolerance +/-4mm (Door closed, unit touching) Light Immunity 50,000 LUX Indicators: green Power supply

26mm, 1G Housing dimension (LxWxD) 16mmx38mmx19mm(standard) 1900mmx9mmx38mm(slim) Power Unit PWS911-220 Dimension(LxWxD) 60mmx50mmx190mm Power 220VAC±15%, 50/60HZ Power

9 Liightt Curttaiin FOR DOOR PROTECTION Model 917(B) Number of beams 128 Number of sensors 32 Sensor spacing 53mm Scan Mode 4 ways cross scanning Response time <40ms Range of detection mm(Max 4000mm as required ) Position of diodes From 50mm to 1670mm, Average: 53mm Active protection height 1810mm (10mm mm) Vertical mounting tolerance +/-10mm (Door closed, unit touching) Horizontal mounting tolerance +/-4mm (Door closed, unit touching) Light Immunity 50,000 LUX Indicators: green Power supply presents Indicators: red System Fault or beams obstructed Oscillating testing 20Hz, 1.26mm, 1G Housing dimension (LxWxD) 16mmx38mmx19mm(standard) 1900mmx9mmx38mm(slim) Power Unit PWS Dimension(LxWxD) 60mmx50mmx190mm Power 220VAC±15%, 50/60HZ Power consumption <10VA Outputs Relay contact (NC/NO) Action Span >10 Contact Capability 1A/120VAC or 1A/30VDC Isolation 1500V Short circuit protection Yes Buzzer functions On-OFF-Timer Buzzer delay 10s, 30s Buzzer Active 60s, infinite Buzzer setting Intermittent, constant

10 Door System CAR DOOR OPERATOR LANDING DOOR OPERATOR ALL CAR & LANDING DOOR OPERATOR IN MITSUBISHI TYPE

15 Button & Indicator BUTTON Micro Push

16 ELEVATOR CONTROLLER VVVF Controller for new installation & Modernization Yaskawa Inverter Varispeed L7 CIMR-L7B47P5 7.5 kw (10HP) CIMR-L7B kw (15HP) CIMR-L7B kw (20HP) CIMR-L7B kw (25HP) Encoder Card, PG-B2 Manual Operator, JV-OP160

High performance and reasonable price MICOLIFT M3 Control Systems becomes the firstchoice for lift alternation and lift reconstruction.

Main processor can handle 32 digits data directly so as to improve the operation ability and handle signals within 64 floors directly.

With friendly human-computer interface, the users do not need any programming; only need to input several parameters according to the real instance. It has the following characteristics.

17 High performance and reasonable price MICOLIFT M3 Control Systems becomes the firstchoice for lift alternation and lift reconstruction. It is the mainstream of lift technology development MICOLIFT M3 employs local CAN bus control and multi-processor structure. Main processor can handle 32 digits data directly so as to improve the operation ability and handle signals within 64 floors directly. Its main board adopts four-layer board-making techniques and surface-paste technology to maximize system s antiinterference ability. The top and bottom board are overlay without wiring. With friendly human-computer interface, the users do not need any programming; only need to input several parameters according to the real instance. It has the following characteristics. Hoistway parameters self-learning Adopting high-speed counting technology and nicety orientation technology to maximize leveling precision. Four-thread system minimizes wiring. The system uses serial communication technology, and thus all the calling signals are connected by two communication wires and reliable insert unit, therefore local wiring progress can be significantly speed up and errors reduced. Making controller standardized manufacture possible. Calling lifts directly from the system. All the hall call signals and car call signals can be operated and displayed on the system. Automatic timing for closing/opening or closing-door protection. Choosing not to answer signals from a certain floor. Choosing single/double-door or not opening-door in a certain floor. Setting floor display according to personal preference. Setting single-floor and multi-floor running curve, with over-floor decelerating point. Supporting remote monitoring Fifty error history records. With MICOLIFT M3, you can solve lift problems immediately, and even keep your lifts away from errors in advance.

18 ISO9001:2000 certificate for quality management system Four-thread system minimizes wiring. The system uses serial communication technology, and thus all the calling signals are connected by two communication wires and reliable insert unit, therefore local wiring progress can be significantly speed up and errors reduced. Option: Lift Control Functions

19 Function M3 M3P 1 Inspection 2 Universal set control system 3 Self-security run with slow speed 4 Automatic opening-door on arrival 5 Door security protection 6 Orderly hall call press-button operation for opening doors at the current floor 7 Press-button operation for opening and closing doors 8 Automatic closing-door time-delay 9 Automatic set and change direction 10 Opening doors and orienting through hall call signal 11 Car call signal record wrong and re-press to cancel 12 Automatic cancel command while direction reverse Optional function 13 Automatic divide speed while single / multi-floor run (over 1.5m/s) 14 Direct run with full load 15 Arrival clock 16 Automatic cut off car light and fan while waiting lift 17 Automatic return to base station Optional for single lift 18 Humanity LED operative unit 19 Communicated with upper position computer 20 Error history 21 Hoistway floor self-learning 22 Set the sever floor 23 Set display symbol for floor 24 Driver operate 25 Flashed lights corresponding to hall call signal when running with a driver

20 Function M3 M3P 26 Automatic answering of car call and cancel decelerating signal 27 Orderly answering of hall call and cancel decelerating signal 28 Independent running 29 Floor displayer of dots matrix 30 Rolling display of run direction 31 Automatic correct for floor position signal 32 Lock lift 33 Emergency return while fire Optional for not fire lift 34 Fire man operate Optional for fire lift 35 Voice report station Optional function 36 Protection of door safe touch board 37 Over-loaded alarm and protection 38 Proof disturb of light load Optional function 39 Protection for run with reverse direction 40 Protection of proof slip 41 Stop car by hall call answer of the farthest reverse direction 42 Constrained speed-changing at the terminal floor 43 Automatic re-opening-door due to closing-door error 44 Error protection of inverter 45 Main control CPU WDT protection 46 Monitor for village (or mansion) Optional function 47 Remote monitor Optional function by modem and telephone line 48 Parallel run Optional function 49 Group control run Optional function 50 Service for rush time while on duty Optional while group control 51 Waiting machine dispersedly Activated while group control 52 Display running curve Must be equipped with tacho encoder (optional function)

The Four Layers Elevator Control System Design Based on S7-200 PLC Xianjie Feng

Advances in Engineering Research (AER), volume 107 2nd International Conference on Materials Engineering and Information Technology Applications (MEITA 2016) The Four Layers Elevator Control System Design